|
Home > Archive > Flight simulator > July 2005 > Mr Spreadsheet
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
|
| I happened onto this page with a spreadsheet that does sumthin'. I know
the spreadsheet guru's can tell us. 
Here's a quote
AirWrench is a new Windows-based flight dynamics ‘editor’ written
entirely in C++. It has been designed to create and tune flight
dynamics files for CFS2, CFS3, FS2002 and FS2004 with point and click
simplicity.
http://www.mudpond.us/
--
boB,
SAG 70
U.S. Army Aviation (retired)
Central Texas - 5NM West of Gray Army Airfield (KGRK)
| |
| Gregory 2005-07-29, 8:32 pm |
| On Fri, 29 Jul 2005 08:34:53 GMT, boB <akita_77REMOVECAPS@yahoo.Xcom>
brought the following to our attention:
quote:
>I happened onto this page with a spreadsheet that does sumthin'. I know
> the spreadsheet guru's can tell us.
>
>Here's a quote
>
>AirWrench is a new Windows-based flight dynamics ‘editor’ written
>entirely in C++. It has been designed to create and tune flight
>dynamics files for CFS2, CFS3, FS2002 and FS2004 with point and click
>simplicity.
>
>http://www.mudpond.us/
Jerry continues with the fine simulator work.. consider this quote;
"This should allow just about anyone to create accurate, realistic
performing flight models for CFS2, CFS3, FS2002 or FS2004 without
purchasing Excel and manually entering data in the ‘dreaded’ Flight
Dynamics Workbook."
Note the `flight dynamics workbook'.. Jerry had the entire AIR file in
a SS with the capability to burn the changes. If he had only made a
version w/o ordinance (used in CFS) but it had to be for combat AC.
From that came the marvelous utility AirDat (airupdate)..
http://www.mudpond.us/utilities_index.html
Be sure and add this gem to your system.. so you can export, and burn
precision SS (spreadsheet) tables into the AIR file!!
-g
| |
| John ward 2005-07-29, 8:32 pm |
| Hi Gregory,
Spreadsheet Heaven, mate? :-))
Regards,
John Ward
"Gregory" <flightsim.maps@bkwds.comcast.net> wrote in message
news:8udke15s89oqb4etvn7hdiobaji1abllrf@4ax.com...
quote:
> On Fri, 29 Jul 2005 08:34:53 GMT, boB <akita_77REMOVECAPS@yahoo.Xcom>
> brought the following to our attention:
>
>
>
> Jerry continues with the fine simulator work.. consider this quote;
>
> "This should allow just about anyone to create accurate, realistic
> performing flight models for CFS2, CFS3, FS2002 or FS2004 without
> purchasing Excel and manually entering data in the 'dreaded' Flight
> Dynamics Workbook."
>
> Note the `flight dynamics workbook'.. Jerry had the entire AIR file in
> a SS with the capability to burn the changes. If he had only made a
> version w/o ordinance (used in CFS) but it had to be for combat AC.
> From that came the marvelous utility AirDat (airupdate)..
>
> http://www.mudpond.us/utilities_index.html
>
>
> Be sure and add this gem to your system.. so you can export, and burn
> precision SS (spreadsheet) tables into the AIR file!!
>
>
> -g
>
>
|
| |
|
|